Yangzhou: will strictly limit decorative landscape lighting

In the future urban lighting construction, decorative landscape lighting will be strictly restricted. This is a clear requirement put forward by the “Urban Urban Lighting Management Measures” recently issued.

At the "two sessions" this year, CPPCC members proposed to reduce the number and brightness of some street lights in urban areas. Adhere to the principles of economy, practicality, energy conservation and environmental protection; adhere to the principle that urban lighting facilities planning and construction are compatible with Yangzhou's economic level.

Limit decorative landscape lighting

The newly introduced management method requires that the functional lighting construction project be designed and constructed in strict accordance with the clear design standards and lighting energy density standards. The construction of landscape lighting facilities should control the scope, brightness and energy density indicators, and strictly limit the decorative landscape lighting.

Article 15 of the Administrative Measures proposes: time-divisional lighting according to factors such as pedestrians and vehicle flow of roads; reactive power compensation for gas discharge lamps; advanced power outage and power transmission control methods; promotion and adoption of high-efficiency light sources, and gradual replacement Low-efficiency light source; energy-saving ballasts and control appliances; high-efficiency lighting fixtures, and regular cleaning of lighting fixtures to improve lighting.

"Safe distance" is not less than 1 meter

The new management approach also focuses on another important issue, namely lighting security. The management regulations stipulate that any unit or individual shall, after conducting an underground or underground construction that may touch, relocate, demolish, or affect the safe operation of the city, be reviewed and recorded by the urban lighting management agency, and then organized or removed by the urban lighting management organization. jobs. Trees near urban lighting facilities must be no less than 1 meter away from charged objects.

In addition, when building urban lighting facilities, the original trees should be avoided to meet the safety distance; when urban greening is constructed, the newly planted trees should avoid the original lighting facilities to meet the safety distance.

The newly introduced management method also requires that the lighting rate is not less than 95% and the main road is not less than 98%.






Door Lock Motor Characteristics 1. No direction: don't need to distinguish the door direction, left and right sides, both inside and outside the door, can be universal. (convenient purchase locks and reduce inventory). 

Door Lock Motor  Dc Gear Motor

2. Power: the power consumption is only equivalent to one 5 of the electric control lock, electric lock, 3 A magnetic lock power to open the door, often consumes 0.27 A. And spiritual lock unlock instantaneous current is less than 0.5 A, reduced the entrance guard, talkback host power consumption.

3. No collision: close the door without collision, reduces the choice of door closers requirements (not necessarily with 65 kg of door closers, door closers are free to choose to suit the door), to solve the building door because the door closers clash of the hydrodynamic force is too high, it is not easy to make the door more deformation, prolong the service life of the body. 

4. The voice is light: close the door automatically locked, no noise, solves the noise due to electric control lock itself. 

5. Life is long, life is up to 350000 times


Operating temperature range:

Mini Door Lock Motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a  Lock Motor  is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

 lock motor  should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of  Door Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.



●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Lock motor


Door Lock Motor

Door Lock Motor,Mini Door Lock Motor,Door Lock Dc Motor,Door Lock Gear Motor

Shenzhen Shunchang Motor Co., LTD. , http://www.scgearmotor.com